How To Use

Step 1: Charge the Device

Fully charge the nail drill before first use using the included Type-C charging cable.
A full charge takes approximately 1–2 hours and provides up to 10–12 hours of runtime.

Step 2: Insert the Drill Bit

Choose your desired drill bit and firmly insert it into the handpiece.
Make sure the bit is securely locked before operating the machine.

Step 3: Power On the Machine

Press the power button to turn on the Nitro Luxcore Nail Drill Machine.

Step 4: Adjust the Speed

Use the control dial or buttons to adjust the speed from 0–45,000 RPM depending on your nail service needs:

• Lower speeds for natural nails and cuticle work
• Higher speeds for acrylic removal and shaping

Step 5: Begin Nail Service

Gently guide the handpiece over the nail surface to shape, smooth, prep, or remove product as needed.
Allow the machine to do the work without applying excessive pressure.

Step 6: Clean & Store

After use:

• Turn off the machine
• Remove and sanitize the drill bit
• Wipe the handpiece clean
• Store the device in a dry, safe place

Important Safety Instructions

• Use only the adapter included with the machine.
• Use only compatible nail drill bits.
• Do not apply excessive pressure during use.
• Keep away from water and moisture.
• Turn off the machine when not in use.
• Keep out of reach of children.
• Clean and disinfect drill bits after every use.
• Do not disassemble the device.